## Home [Home](https://www.oilchemleader.net/) ## Product Customization [Product Customization](https://www.oilchemleader.net/product-customization): ## Factory VR [Factory VR](https://www.oilchemleader.net/factory-vr): ## System Design [System Design](https://www.oilchemleader.net/system-design): ## Acidizing & Fracturing Services [Acidizing & Fracturing Services](https://www.oilchemleader.net/acid-fracturing-technology-service): ## On-site Cementing Services [On-site Cementing Services](https://www.oilchemleader.net/cementing-on-site-technical-services): ## On-site Drilling Services [On-site Drilling Services](https://www.oilchemleader.net/on-site-technical-services-for-drilling): ## Company Structure [Company Structure](https://www.oilchemleader.net/company-structure): ## Company Honors [Company Honors](https://www.oilchemleader.net/company-honors): ## Contact Us [Contact Us](https://www.oilchemleader.net/contact-us): ## About Us [About Us](https://www.oilchemleader.net/about-us): ## Products link [Products](https://www.oilchemleader.net/products/) ## XW Toughened Fiber [XW Toughened Fiber](https://www.oilchemleader.net/xw-toughened-fiber-product): Fiber length, mm Fiber length, mm 3~6 (Short fiber) 10~15( Long fiber ) Appearance Incremental flexural strength,%/50℃,0.1MPa,4 ## XP-5 Defoamer for Oil Well Cementing [XP-5 Defoamer for Oil Well Cementing](https://www.oilchemleader.net/xp-5-defoamer-for-oil-well-cementing-product): Appearance Deforming ratio,% Homogeneous liquid ≥80.0 Normal dosage  0.1%~0.4% (BWOC) ## XP-4 Anti-salt Defoamer for Oil Well Cementing [XP-4 Anti-salt Defoamer for Oil Well Cementing](https://www.oilchemleader.net/xp-4-anti-salt-defoamer-for-oil-well-cementing-product): Appearance Deforming ratio,% Homogeneous liquid ≥90.0 Normal dosage  0.1%~0.4% (BWOC) ## XP-3 Defoamer for Oil Well Cementing [XP-3 Defoamer for Oil Well Cementing](https://www.oilchemleader.net/xp-3-defoamer-for-oil-well-cementing-product): Appearance Fineness(0.42mm screen residue), % No hardening powder and particles ≤ 7.0 Recovery rate of cement sl ## XP-1 Defoamer for Oil Well Cementing [XP-1 Defoamer for Oil Well Cementing](https://www.oilchemleader.net/xp-1-defoamer-for-oil-well-cementing-product): Appearance Deforming ratio,% Homogeneous liquid ≥90.0 Normal dosage  0.1%~0.3% (BWOC) ## WH-7 OBM Detergent [WH-7 OBM Detergent](https://www.oilchemleader.net/wh-7-obm-detergent-product): Appearance Water Transparent liquid Hot water(50℃) Flushing fluid ## WH-5 OBM Detergent [WH-5 OBM Detergent](https://www.oilchemleader.net/wh-5-obm-detergent-product): Appearance Water Homogeneous liquid Hot water(50℃) Flushing fluid WH-5 ## WH-2 Weighting Spacer Agent [WH-2 Weighting Spacer Agent](https://www.oilchemleader.net/wh-2-weighting-spacer-agent-product): Appearance Water content,% Flowbility powder or particles ≤10.0 Fineness (0.425mm sieve),% Initial con ## WH-1 WBM Detergent [WH-1 WBM Detergent](https://www.oilchemleader.net/wh-1-wbm-detergent-product): Appearance Density(20±2℃), g/cm3 Homogeneous liquid 1.0±0.05 Flushing efficiency(38.0℃),&a ## WBR-1 Water-based Resin [WBR-1 Water-based Resin](https://www.oilchemleader.net/wbr-1-water-based-resin-product): Appearance Initial consistency (90℃/53.3 MPa/4min),Bc Uniform liquid ≤30.0 Time for 40Bc～100Bc ## USZ Friction Reducer for Oil Well Cementing [USZ Friction Reducer for Oil Well Cementing](https://www.oilchemleader.net/usz-friction-reducer-for-oil-well-cementing-product): Appearance Fineness (0.315mm sieve),% No hardened particles or powder <15.0 Thickened linear(85℃.70.3MPa.44min),Bc Ratio ## UPV-L Friction Reducer for Cementing [UPV-L Friction Reducer for Cementing](https://www.oilchemleader.net/upv-l-friction-reducer-for-cementing-product): Appearance Thickened linear(85℃.70.3MPa.44min),Bc Homogeneous liquid Normal Ratio of thickening time(85℃,70.3M ## QJ-625 Expanding Additive for Oil Well Cementing [QJ-625 Expanding Additive for Oil Well Cementing](https://www.oilchemleader.net/qj-625-expanding-additive-for-oil-well-cementing-product): Initial foaming time(35℃), min Expansion ratio(75℃),% ≥40.0 ≥10.0 Thickening time(75℃,40MPa,40min) Compression st ## GR-S Latex for Oil Well Cementing [GR-S Latex for Oil Well Cementing](https://www.oilchemleader.net/gr-s-latex-for-oil-well-cementing-product): Sudden change value of consistency 40Bc~100Bc time,min ≤10.0 ≤40.0 Fluid loss(80℃,6.9MPa,30min),ml Compression st ## GR-L Latex for Oil Well Cementing [GR-L Latex for Oil Well Cementing](https://www.oilchemleader.net/gr-l-latex-for-oil-well-cementing-product): Appearance Initial consistrency(80℃,46.5MPa,45min),Bc Homogeneous liquid ≤30.0 Sudden change value of consistency 40Bc~1 ## GH-II High Temperature Retarder for Oil Well Cementing [GH-II High Temperature Retarder for Oil Well Cementing](https://www.oilchemleader.net/gh-ii-high-temperature-retarder-for-oil-well-cementing-product): Fineness (0.315mm sieve),% Thickening time(120℃.73.9MPa.61min), min <15.0 ≥120.0 Initial consistency(120℃.73.9MPa. ## GH-10 Retarder for High Temperature Oil Well Cementing [GH-10 Retarder for High Temperature Oil Well Cementing](https://www.oilchemleader.net/gh-10-retarder-for-high-temperature-oil-well-cementing-product): Thickening time,min/90℃,53.3MPa,49min Mutation value of thickening curve,Bc ≥120.0 ≤10.0 Thickening time extension ## GH-9S Retarder for High Temperature Oil Well Cementing [GH-9S Retarder for High Temperature Oil Well Cementing](https://www.oilchemleader.net/gh-9s-retarder-for-high-temperature-oil-well-cementing-product): Mutation value of thickening curve,Bc Thickening time extension value, min   ≤10.0 ≥60.0 Sensiti ## GH-9 Retarder for Oil Well Cementing [GH-9 Retarder for Oil Well Cementing](https://www.oilchemleader.net/gh-9-retarder-for-oil-well-cementing-product): Dosage sensitivity, % Temperature sensitivity, % ≤25.0 ≤20.0 Transition time (90℃ / 53.3MPa / 49min), min Free li ## GH-8S High Temperature Retarder for Oil Well Cementing [GH-8S High Temperature Retarder for Oil Well Cementing](https://www.oilchemleader.net/gh-8s-high-temperature-retarder-for-oil-well-cementing-product): Thickening time extension value, min   Sensitivity of increase,%   ≥60.0 ≤25.0 ## GH-8 High Temperature Retarder for Oil Well Cementing [GH-8 High Temperature Retarder for Oil Well Cementing](https://www.oilchemleader.net/gh-8-high-temperature-retarder-for-oil-well-cementing-product): Initial consistency , Bc/120℃,73.9MPa,61min Thickening time,min/120℃,73.9MPa,61min ≤30.0 ≥120.0 Mutation value of ## GH-7 High Temperature Retarder for Oil Well Cementing [GH-7 High Temperature Retarder for Oil Well Cementing](https://www.oilchemleader.net/gh-7-high-temperature-retarder-for-oil-well-cementing-product): Sensitivity of temperature,% Transition time,min//100℃.60.2MPa.53min ≤20.0 ≤40.0 Free liquid,% Compression streng ## GH-6 Middle Temperature Retarder for Oil Well Cementing [GH-6 Middle Temperature Retarder for Oil Well Cementing](https://www.oilchemleader.net/gh-6-middle-temperature-retarder-for-oil-well-cementing-product): Thickening time,min/80℃.46.5MPa.45min Initial consistency , Bc ≥120.0 ≤30.0 Mutation value of thickening curve,Bc ## GH-3S Retarding Type Fluid Loss Additives for Oil Well Cementing [GH-3S Retarding Type Fluid Loss Additives for Oil Well Cementing](https://www.oilchemleader.net/gh-3s-retarding-type-fluid-loss-additives-for-oil-well-cementing-product): Time of 40Bc～100Bc,min Thickening time extension value,min ≤40.0 ≥30.0 Filter loss,ml(80℃,6.9MPa,30min) Free liqu ## GH-3S Fluid Loss Additives for Oil Well Cementing [GH-3S Fluid Loss Additives for Oil Well Cementing](https://www.oilchemleader.net/gh-3s-fluid-loss-additives-for-oil-well-cementing-product): Water content,% Fineness(0.315mm sieve),% ≤8.0 ≤15.0 Initial consistency,Bc(80℃,46.5MPa,45min) Thickening linear ## GD-S Flow Modifier for Oil Well Cementing [GD-S Flow Modifier for Oil Well Cementing](https://www.oilchemleader.net/gd-s-flow-modifier-for-oil-well-cementing-product): Appearance Fineness (0.315mm sieve),% Free-flowing granules or powder ≤15.0 Ratio of compression strength /110℃,21MPa,24h ## GD-2 Flow modifier for Oil Well Cementing [GD-2 Flow modifier for Oil Well Cementing](https://www.oilchemleader.net/gd-2-flow-modifier-for-oil-well-cementing-product): Appearance Density,g/cm3 Homogeneous and mildew-free liquid 1.08±0.02 Thickening time /85℃,46.2MPa,50min Compression ## GD-1 Anti-High Temperature Drag Reducing Agent for Oil Well Cementing [GD-1 Anti-High Temperature Drag Reducing Agent for Oil Well Cementing](https://www.oilchemleader.net/gd-1-anti-high-temperature-drag-reducing-agent-for-oil-well-cementing-product): Appearance Fineness (0.315mm sieve),% No hardened particles or powder <15.0 Thickened linear(85℃.70.3MPa.44min),Bc Ratio ## G404 Elastic Additive for Oil Well Cementing [G404 Elastic Additive for Oil Well Cementing](https://www.oilchemleader.net/g404-elastic-additive-for-oil-well-cementing-product): Fineness (0.25mm sieve),% Water content,% ≤10.0 ≤5.0 Thickening time,min/60℃,35.6MPa,28min Initial consistency,&a ## G403 Channeling-control Toughening Additive for Oil Well Cementing [G403 Channeling-control Toughening Additive for Oil Well Cementing](https://www.oilchemleader.net/g403-channeling-control-toughening-additive-for-oil-well-cementing-product): Mutation value of thickening curve,Bc Increasing flexural strength,%/75 ℃.0.1 MPa.48 h ≤10.0 ≥15.0 Increasing impa ## G401 Expanding Additive for Oil Well Cementing [G401 Expanding Additive for Oil Well Cementing](https://www.oilchemleader.net/g401-expanding-additive-for-oil-well-cementing-product): Water content,% Fineness (0.315mm sieve),% ≤8.0 <8.0 Thickening time, min/149 F,35MPa,30min Expansion ratio (%), ## G311 Fluid Loss Control Additive for Oil Well Cementing [G311 Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g311-fluid-loss-control-additive-for-oil-well-cementing-product): 40Bc~100Bc, time, min Fluid loss, ml/80℃.6.9MPa.30min ≤40.0 ≤150.0 Free fluid,% Compression strength, MPa/80℃. No ## G310HS Fluid Loss Additives for Oil Well Cementing [G310HS Fluid Loss Additives for Oil Well Cementing](https://www.oilchemleader.net/g310hs-fluid-loss-additives-for-oil-well-cementing-product): Initial consistency,Bc(120℃,60MPa,60min) Thickened linear ≤30.0 Normal Time of 40Bc~100Bc,min Filter loss,ml(120℃,6.9MPa ## G310H Fluid Loss Additives for Oil Well Cementing [G310H Fluid Loss Additives for Oil Well Cementing](https://www.oilchemleader.net/g310h-fluid-loss-additives-for-oil-well-cementing-product): Thickened linear Time of 40Bc~100Bc,min Normal ≤40.0 Filter loss,ml(120℃,6.9MPa,30min) Compression strength,MPa ## G309 Fluid Loss Control Additive for Oil Well Cementing [G309 Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g309-fluid-loss-control-additive-for-oil-well-cementing-product): Initial consistency. Bc/80℃. 46.5MPa.45min Mutation value of thickening liner,Bc ≤30.0 ≤10.0 40Bc~100Bc, ## G307B Early Strength and Anti leaking Fluid Loss Control Additive for Oil Well Cementing [G307B Early Strength and Anti leaking Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g307b-early-strength-and-anti-leaking-fluid-loss-control-additive-for-oil-well-cementing-product): 40Bc~100Bc, time, min Water loss, ml/50℃. 6.9MPa.30min ≤40.0 ≤150.0 Free fluid,%(80℃) Compression strength, MPa/7 ## G304 Fluid Loss Control Additive for Oil Well Cementing [G304 Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g304-fluid-loss-control-additive-for-oil-well-cementing-product): Appearance Water content, % Brownish red powder or particles ≤8.0 Fineness (0.315 mesh), % Initial consistency,&nbsp ## G303 Fluid Loss Control Additive for Oil Well Cementing [G303 Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g303-fluid-loss-control-additive-for-oil-well-cementing-product): Appearance Water content,% Flow ability powder or particles ≤8.0 Fineness (0.315mm sieve),% Initial consistency, Bc ## G212 Nano Lightening Additives for Oil Well Cementing [G212 Nano Lightening Additives for Oil Well Cementing](https://www.oilchemleader.net/g212-nano-lightening-additives-for-oil-well-cementing-product): Appearance Density of cement slurry,g/cm3 Homogeneous liquid 1.55±0.02 Initial consistency,Bc(60℃,32.8MPa,37 ## G211 Enhancer Agent for Oil Well Cementing [G211 Enhancer Agent for Oil Well Cementing](https://www.oilchemleader.net/g211-enhancer-agent-for-oil-well-cementing-product): Appearance Density, g/cm3 Gray powder 2.60±0.20 Specific surface, m2/kg Slurry density, g/cm3 ## G209L Early Strength Additive for Oil Well Cementing [G209L Early Strength Additive for Oil Well Cementing](https://www.oilchemleader.net/g209l-early-strength-additive-for-oil-well-cementing-product): Thickening time ratio/32℃,8.3MPa,17min Initial consistency, Bc/32℃,8.3MPa,17min ≤0.5 ≤30.0 Compression strength, M ## G209 Early Strength Additive for Oil Well Cementing [G209 Early Strength Additive for Oil Well Cementing](https://www.oilchemleader.net/g209-early-strength-additive-for-oil-well-cementing-product): Appearance Fineness (0.315mm sieve),% Free flowing powder ≤15.0 Thickening time ratio/32℃,8.3MPa,17min Initial ## G208 Accelerator for Oil Well Cementing [G208 Accelerator for Oil Well Cementing](https://www.oilchemleader.net/g208-accelerator-for-oil-well-cementing-product): Appearance Thickening time,min/50℃,25.9MPa,32min powder ≤Original cement slurry Compression strength , MPa/50℃, Ordinary ## G204 Early Strength Additive for Oil Well Cementing [G204 Early Strength Additive for Oil Well Cementing](https://www.oilchemleader.net/g204-early-strength-additive-for-oil-well-cementing-product): Appearance Fineness (0.315mm sieve),% powder ≤15.0 Water content,% Initial consistency, Bc ≤8.0 ≤30. ## G203A Early Strength Additive for Oil Well Cementing [G203A Early Strength Additive for Oil Well Cementing](https://www.oilchemleader.net/g203a-early-strength-additive-for-oil-well-cementing-product): Appearance Fineness (0.315mm sieve),% Free flowing powder ≤15.0 Thickening time ratio/32℃,8.3MPa,17min Initial ## G203 Early Strength Additive for Oil Well Cementing [G203 Early Strength Additive for Oil Well Cementing](https://www.oilchemleader.net/g203-early-strength-additive-for-oil-well-cementing-product): Initial consistency (32℃. 8.3MPa), Bc ≤30.0 Appearance Fineness (0.315 mesh), % White powder ≤15.0 ## G202 Early Strength Additive for Oil Well Cementing [G202 Early Strength Additive for Oil Well Cementing](https://www.oilchemleader.net/g202-early-strength-additive-for-oil-well-cementing-product): Appearance Fineness (0.315mm sieve),% Free flowing powder or particles ≤15.0 Water content,% Thickening time,mi ## G201 Accelerator for Oil Well Cementing [G201 Accelerator for Oil Well Cementing](https://www.oilchemleader.net/g201-accelerator-for-oil-well-cementing-product): Appearance Initial consistency, Bc Free flowing powder or particles ≤30.0 Thickening time,min/55℃,27MPa,20min C ## G35S Fluid Loss Control Additive for Oil Well Cementing [G35S Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g35s-fluid-loss-control-additive-for-oil-well-cementing-product): Appearance Mutation value of thickening curve,Bc Free flowing powder or particles Normal 40Bc ~ 100Bc time,min ## G34S Fluid Loss Control Additives for Oil Well Cementing [G34S Fluid Loss Control Additives for Oil Well Cementing](https://www.oilchemleader.net/g34s-fluid-loss-control-additives-for-oil-well-cementing-product): Appearance Moisture,% Free flow powder or particles ≤8.0 Fineness (0.315mm sieve residue),% Initial consistency ## G32S Fluid Loss Control Additive for Oil Well Cementing [G32S Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g32s-fluid-loss-control-additive-for-oil-well-cementing-product): Appearance Moisture,% Free flow powder or particles ≤8.0 Fineness (0.315mm sieve residue),% Initial consistency ## G30S Quick-soluable Fluid Loss Control Additive [G30S Quick-soluable Fluid Loss Control Additive](https://www.oilchemleader.net/g30s-quick-soluable-fluid-loss-control-additive-product): Appearance Moisture,% Free flow powder or particles ≤8.0 Fineness (0.315mm sieve residue),% Initial consistency ## G21-L Nanometer Early Strength Additive for Oil Well Cementing [G21-L Nanometer Early Strength Additive for Oil Well Cementing](https://www.oilchemleader.net/g21-l-nanometer-early-strength-additive-for-oil-well-cementing-product): Appearance Ratio of thickening time,% (32℃,8.3MPa,17min) Uniform and mildew free ≤0.5 Initial consistency , Bc&a ## DF-T Defoamer for Oil Well Cementing [DF-T Defoamer for Oil Well Cementing](https://www.oilchemleader.net/df-t-defoamer-for-oil-well-cementing-product): Appearance Cement slurry density recovery rate,% Homogeneous liquid ≥90.0 Normal dosage Water quality 0.1% ## DF-R Defoamer for Latex [DF-R Defoamer for Latex](https://www.oilchemleader.net/df-r-defoamer-for-latex-product): Appearance Slurry density recovery rate,% Homogeneous liquid ≥90.0 ## CP-56 Enhancer for Oil Well Cementing [CP-56 Enhancer for Oil Well Cementing](https://www.oilchemleader.net/cp-56-enhancer-for-oil-well-cementing-product): Appearance Fineness (0.315mm sieve),% Gray powder <15.0 Density of cement slurry, g/cm3 Thickening time(52℃/28min ## CP-55 Micro Glass Bead for Oil Well Cement [CP-55 Micro Glass Bead for Oil Well Cement](https://www.oilchemleader.net/cp-55-micro-glass-bead-for-oil-well-cement-product): Appearance Water content, % white powder ≤ 2% True density, g/cm3 Normal dosage 0.6~0.9g/cm3 1.0%～10%(BWOC) ## CP-54 Silicon Powder for Oil Well Cementing [CP-54 Silicon Powder for Oil Well Cementing](https://www.oilchemleader.net/cp-54-silicon-powder-for-oil-well-cementing-product): Appearance Water content,% White powder or slightly colored powder ≤0.5 Fineness (0.180 mesh), % Silica ## CP-53 Light-Weight Additive for Oil Well Cementing [CP-53 Light-Weight Additive for Oil Well Cementing](https://www.oilchemleader.net/cp-53-light-weight-additive-for-oil-well-cementing-product): Appearance Water content,% White or gray flowing powder ≤3.0 Fineness (0.315 mesh), % Density, g/cm3 ≤15.0 ## CP-52 Light-Weight Additive for Oil Well Cementing [CP-52 Light-Weight Additive for Oil Well Cementing](https://www.oilchemleader.net/cp-52-light-weight-additive-for-oil-well-cementing-product): Appearance Water content,% White or gray flowing powder ≤0.2 Stacking Density, g/cm3 Fineness (0.315 mesh), % ≤0.50 ## AMPS [AMPS](https://www.oilchemleader.net/amps-product): Appearance Effective Content, % White Powder or Particle ≥99.00 Melting point, ℃ Color (25% aqueous solution, Pt-Co scale), Hazen ## ZTW Iron Ion Stabilizer [ZTW Iron Ion Stabilizer](https://www.oilchemleader.net/ztw-iron-ion-stabilizer-product): In acidizing, fracturing, and water-injection operations in oilfields, instability of metal ions—especially ferric ions—is a com ## ZHS-2 High-Temperature Acidizing Corrosion Inhibitor [ZHS-2 High-Temperature Acidizing Corrosion Inhibitor](https://www.oilchemleader.net/zhs-2-high-temperature-acidizing-corrosion-inhibitor-product): Appearance   Density (g/cm³): Brown liquid 0.90–1.10 PH Corrosion rate in 15% HCl (g/m&s ## ZHS-1 Acidizing Corrosion Inhibitor [ZHS-1 Acidizing Corrosion Inhibitor](https://www.oilchemleader.net/zhs-1-acidizing-corrosion-inhibitor-product): Appearance   Density (g/cm³): Transparent liquid 0.90–1.10 PH Corrosion rate (60 °C） ## Organic Polyhydrogen Acid for Acidizing – MH-5 [Organic Polyhydrogen Acid for Acidizing – MH-5](https://www.oilchemleader.net/organic-polyhydrogen-acid-for-acidizing-mh-5-product): Appearance Density (20°C, g/cm³) Colorless to light-yellow liquid ≥ 1.1 pH Dissolution rate of CaCO₃ ## Organic Polyhydrogen Acid for Acidizing – MF [Organic Polyhydrogen Acid for Acidizing – MF](https://www.oilchemleader.net/organic-polyhydrogen-acid-for-acidizing-mf-product): Appearance   Density (g/cm³): White crystals ≥1.0 Dissolution rate of CaCO₃ per gram using 40% M ## XP-2 Defoamer for Drilling Fluid [XP-2 Defoamer for Drilling Fluid](https://www.oilchemleader.net/xp-2-defoamer-for-drilling-fluid-product): Appearance Density, g/cm3 Milky white or light yellow 0.9±0.1 Fresh water, dosage 0.3% Salt water, dosage 0.4% &a ## TY-1L Amino Polyol Inhibitor [TY-1L Amino Polyol Inhibitor](https://www.oilchemleader.net/ty-1l-amino-polyol-inhibitor-product): Appearance Density(20℃), g/cm3 Uniform transparent liquid 1.1 ± 0.1 PH, (1% aqueous solution) Relative inhibi ## OCL-XY-27 Amphoteric Polymer Thinner for Drilling Fluid [OCL-XY-27 Amphoteric Polymer Thinner for Drilling Fluid](https://www.oilchemleader.net/ocl-xy-27-amphoteric-polymer-thinner-for-drilling-fluid-product): Appearance Moisture, % White or light yellow powder ≤10.0 Fineness (20 mesh screen residue),% PH,(1%water solutio ## OCL-RQ Anti-sticking Lubricant [OCL-RQ Anti-sticking Lubricant](https://www.oilchemleader.net/ocl-rq-anti-sticking-lubricant-product): Appearance PH Pale yellow liquid 6.0～8.0 Density, g/cm3 Reduction rate of lubricant coefficient, % 0.85±0.05 &am ## OCL-OSE OBM Secondary Emulsifier [OCL-OSE OBM Secondary Emulsifier](https://www.oilchemleader.net/ocl-ose-obm-secondary-emulsifier-product): Appearance Density, g/cm3 Homogeneous viscous liquid 0.86-1.05 Viscosity, (100 r/min,20℃ ) Flash point(℃) ≥6 ## OCL-OPE OBM Primary Emulsifier [OCL-OPE OBM Primary Emulsifier](https://www.oilchemleader.net/ocl-ope-obm-primary-emulsifier-product): Appearance Density, g/cm3 Brown-yellow viscous liquid 0.86-1.05 Viscosity, (100 r/min,20℃ ) Flash point(℃) ≥ ## OCL-LXT-1 High-Temperature and Salt-Resistant Rheology Modifier for Drilling Fluids [OCL-LXT-1 High-Temperature and Salt-Resistant Rheology Modifier for Drilling Fluids](https://www.oilchemleader.net/ocl-lxt-1-high-temperature-and-salt-resistant-rheology-modifier-for-drilling-fluids-product): Apparent viscosity, mPa·s ≥ Plastic viscosity, mPa·s ≥ 25 15 API fluid loss, mL ≤ HTHP ## OCL-JSN Sulfonated Polymer Fluid Loss Reducer (Saturated Brine) [OCL-JSN Sulfonated Polymer Fluid Loss Reducer (Saturated Brine)](https://www.oilchemleader.net/ocl-jsn-sulfonated-polymer-fluid-loss-reducer-saturated-brine-1-product): Moisture, % ≤ pH Value 10 10 Active Content, % ≥ Degradation Residue, % ≤   & ## OCL-JCS Sulfonate Polymer Fluid Loss Control Agent (for Complex Brine Systems) [OCL-JCS Sulfonate Polymer Fluid Loss Control Agent (for Complex Brine Systems)](https://www.oilchemleader.net/ocl-jcs-sulfonate-polymer-fluid-loss-control-agent-for-complex-brine-systems-product): Moisture, % ≤ pH Value 10 10 Active Content, % ≥ Degradation Residue, % ≤   & ## OCL-JB High Temperature Salt-Resistance Fluid Loss Control Agent [OCL-JB High Temperature Salt-Resistance Fluid Loss Control Agent](https://www.oilchemleader.net/ocl-jb-high-temperature-salt-resistance-fluid-loss-control-agent-product): OCL-JB Fluid Loss Reducer is a graft copolymer of AMPS, acrylic acid, and acrylamide. It provides excellent filtration control performance under hig ## MEG Lubricant and Inhibitor [MEG Lubricant and Inhibitor](https://www.oilchemleader.net/meg-lubricant-and-inhibitor-product): Appearance Lubricity Reduction Rate, % Colored solid powder ≥60.0 Active Content, % Apparent Viscosity Inhibition Rate, % ## FA367 Encapsulating Agent for Drilling Fluid [FA367 Encapsulating Agent for Drilling Fluid](https://www.oilchemleader.net/fa367-encapsulating-agent-for-drilling-fluid-product): Appearance Moisture, % White to light gray granules or powder ≤9.0 Sieve Residue (0.90 mm sieve), % Apparent Viscosity (1% ## BSD Wellbore Repairing Agent for Drilling Fluid [BSD Wellbore Repairing Agent for Drilling Fluid](https://www.oilchemleader.net/bsd-wellbore-repairing-agent-for-drilling-fluid-product): Appearance Moisture content , % Solid powder ≤10.0 Penetration depth through medium-pressure sand bed, cm ## GH-I Middle Temperature Retarder for Oil Well Cementing [GH-I Middle Temperature Retarder for Oil Well Cementing](https://www.oilchemleader.net/gh-i-middle-temperature-retarder-for-oil-well-cementing-product): Appearance Water content,% Free flowing powder ≤8.0 Fineness (0.315mm sieve),% Thickening time(70℃.39.6MPa.41min), min ## G31S Fluid Loss Control Additive for Oil Well Cementing [G31S Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g31s-fluid-loss-control-additive-for-oil-well-cementing-product): Temperature resistance Salt resistance 30–160℃. Applicable in fresh water to saturated brine. Water solubility Typical dosage ## G307A Early Strength and Anti-channeling Fluid Loss Control Additive for Oil Well Cementing [G307A Early Strength and Anti-channeling Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g307a-early-strength-and-anti-channeling-fluid-loss-control-additive-for-oil-well-cementing-product): Appearance Water content, % Free-flowing powder or granules without caking ≤8.0 Fineness (0.315 mesh), % Initial consistency. Bc/ ## G310S Fluid Loss Control Additive for Oil Well Cementing [G310S Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g310s-fluid-loss-control-additive-for-oil-well-cementing-product): Key message: Appearance Initial consistency, Bc / 80℃, 46.5 MPa, 45 min Uniform liquid without mildew ≤30.0 Thickeni ## G310 Fluid Loss Control Additive for Oil Well Cementing [G310 Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g310-fluid-loss-control-additive-for-oil-well-cementing-product): Key message: Appearance Initial consistency, Bc / 80℃, 46.5 MPa, 45 min Uniform liquid without mildew ≤30.0 Thickening linear ## G307 Early Strength and Anti-channeling Fluid Loss Control Additive for Oil Well Cementing [G307 Early Strength and Anti-channeling Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g307-early-strength-and-anti-channeling-fluid-loss-control-additive-for-oil-well-cementing-product): Key message: Appearance Water content,% Free-flowing powder or granules without caking ≤8.0 Fineness (0.315mm sieve),% ## G306 Fluid Loss Control Additive for Oil Well Cementing [G306 Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g306-fluid-loss-control-additive-for-oil-well-cementing-product): Key message: Appearance Water content,% Free-flowing powder or granules without caking ≤8.0 Fineness (0.315mm sieve),% ## G302 Fluid Loss Control Additive for Oil Well Cementing [G302 Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g302-fluid-loss-control-additive-for-oil-well-cementing-product): Key message: Appearance Water content,% Flow ability powder or particles ≤8.0 Fineness (0.315mm sieve),% Initial consistency, Bc ## G301 Fluid Loss Control Additive for Oil Well Cementing [G301 Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g301-fluid-loss-control-additive-for-oil-well-cementing-product): Key message: Appearance Water content,% powders or granules ≤8.0 Fineness (0.315mm sieve),% Initial consistency, Bc ≤15.0 ## G33S Fluid Loss Control Additive for Oil Well Cementing [G33S Fluid Loss Control Additive for Oil Well Cementing](https://www.oilchemleader.net/g33s-fluid-loss-control-additive-for-oil-well-cementing-product): Key message: Appearance Ingredients Free flowing powder or particles AMPS, low molecular amide, multi hydroxy carboxylic acid, auxilia ## News link [News](https://www.oilchemleader.net/news/) ## Anchoring the Global Energy Stage! Our Company at the 2025 U.S. OTC Oil and Gas Exhibition [Anchoring the Global Energy Stage! Our Company at the 2025 U.S. OTC Oil and Gas Exhibition](https://www.oilchemleader.net/news/anchoring-the-global-energy-stage-our-company-at-the-2025-u-s-otc-oil-and-gas-exhibition): From May 8-10, 2025, the global oil and gas industry’s major event – the Offshore Technology Conference (OTC) – will b ## Practicing the "Dual Carbon" Strategy and Building an Innovation-Driven Development Hub [Practicing the "Dual Carbon" Strategy and Building an Innovation-Driven Development Hub](https://www.oilchemleader.net/news/practicing-the-dual-carbon-strategy-and-building-an-innovation-driven-development-hub): Recently, our company participated in an exclusive interview with Xinhua News Agency, where we engaged in an in-depth discussion on the theme of &qu ## Our Company Attends the 2025 Indonesia IPA International Oil and Gas Exhibition [Our Company Attends the 2025 Indonesia IPA International Oil and Gas Exhibition](https://www.oilchemleader.net/news/our-company-attends-the-2025-indonesia-ipa-international-oil-and-gas-exhibition): From May 20-22, 2025, the 2025 Indonesia IPA International Oil and Gas Exhibition will be grandly held in Jakarta. Our company will be represented b ## Module ## Top search link [Top search](https://www.oilchemleader.net/top-search/)